EDGE DETAILS

Williams Stone Company can create the following edge detail configurations on its straight or curved vertical, sloped or bridge curbing, as indicated in the table below:

Edge Detail Descriptions

There are five edge detail options that may be requested on the curb types shown in the table above. They include:

• Straight edge (standard).
  
  
• Buzzed: 1/4-inch bullnose (rounded, not beveled).
  
  
• Rounded edge: one or both edges are chamfered and then rounded off to 1/2-inch or greater radius.
  
  
• Chamfer: 45-degree bevel is standard, 1/2", 3/4" or 1".
  
  
• Beveled mountable: 45-degree chamfer is standard, 3" x 3", 4" x 4", or 5" x 5".