GRANITE CURBING
VERTICAL GRANITE CURBING
VERSATILE GRANITE CURBING FOR ANY APPLICATION
Williams Stone Company offers a full line of vertical curbing, straight or curved, in a wide variety of surface finishes, edge details and joints.
Standard Sizes
Widths: 4 inches and up
Depths: 4 to 24 inches
Lengths: up to 10 feet *
Radius curves: 1 to 125 feet
* Standard curbing are typically random in length (3 - 10 feet); however, cut-to-length units are available upon request.
Edge Detail Options
There are five basic edge details that may be specified to the exposed edges of a vertical curb:
Straight edge (standard).
Buzzed: 1/4-inch chamfer (or eased) edge.
Rounded edge: one or both edges are chamfered and then rounded off to 1/2-inch or greater radius.
Chamfer: 45-degree bevel is standard, 1/2", 3/4" or 1".
Beveled mountable: 45-degree chamfer is standard, 3" x 3", 4" x 4" or 5" x 5".
Joint Options
There are three basic joint options that may be specified on vertical curb, depending on whether it is straight or curved:
Standard: a straight 90-degree cut, with each bottom corner knocked off to aid installation and provide a point to mortar one curb to another.
Full: a straight cut with 90-degree angles at top and bottom.
We're ready to fill your order and ship direct to your job site with minimal lead times.
Contact Pat Wilson in our Curbing Products Department today!