CUT STONE & LANDSCAPE PRODUCTS < Back HERITAGE CURB RUSTIC GRANITE CURB FOR AN OLD-WORLD LOOK Heritage Curb is an all-natural, environmentally friendly, extremely durable, rough-split granite curb designed to lend an old-world look to any street, parking lot, driveway or landscaping application. These rustic curbing blocks provide secure protection for sidewalks, shoulders, driveways and yards. The rough-split finish also affords a level of protection for vehicle tires. When installed properly, Heritage Curb easily withstands winter weather and snow plow abuse. It is so strong it can even be recycled and used again as landscape plans change over the years. SIZING Block dimensions vary from 3- to 5-inches thick, 12- to 14-inches high and 12- to 18-inches long. Yield is approximately 30 linear feet per ton. FINISH Heritage Curb is made from William's Blue-SkyTM; granite, a blue-gray stone with split faces, split top and sawn sides. Edge Details N/A We're ready to fill your order and ship direct to your job site with minimal lead times. Contact Jon Ertl in our Landscaping & Cut Stone Products Department today! CALL JON: 800-832-2052 or Email jon@williamsstone.com

GRANITE VENEERS < Back GRANITE VENEER ALL COLORS & FINISHES Thermalled Chester Gray & Hammered Williams Blue Sky GRANITE VENEER Thermaled Moonlit Rose & Thermaled Chester Gray GRANITE VENEER Thermaled Chester Gray, Thermaled Moonlit Rose & Hammered Williams Blue Sky GRANITE VENEER LET YOUR IMAGINATION FLOW WITH 16 DIFFERENT COLOR & FINISH POSSIBILITIES Williams Stone Veneers are available in our four standard granite colors, all quarried at our Blue Sky Quarry in Georgia and our New England facility in East Otis, Massachusetts. When combined with the various finishes available from Williams Stone Company, can provide a wide variety of looks that can enhance your design and better achieve the objectives of the project. GRANITE COLORS Old Berkshire® Chester Gray® Moonlit Rose® Williams' Blue Sky™ Silver Cloud™ Virginia Mist™ GRANITE FINISHES Split Sawn Rock Hammered Thermal Polished Honed (new) Consider these just a few of the many possibilities and let your creative juices start flowing! Contact Williams Stone Company customer service to discuss your specific needs! CALL JON: 800-832-2052 or Email jon@williamsstone.com ALL COLORS & FINISHES:

CUT STONE & LANDSCAPE PRODUCTS < Back POSTS STANDARD & CUSTOM POSTS FOR SITE DEVELOPMENT Williams Stone Company offers standard and custom posts for use in site development and landscape design, including: Fence posts Hitching posts Custom drilling (for brackets) Custom core drilling AVAILABLE SIZES 6" x 6" x 6' 7" x 7" x 7' 8" x 8" x 7' Other custom sizes available up to 18" x 18" STANDARD FINISH Sawn two sides, split two sides, split top (standard) TOP SURFACE OPTIONS Sawn flat top Sawn apex top SIDE SURFACE OPTIONS Thermal two sides, split two sides Sawn two sides, rock face two sides Thermal two sides, rock face two sides Sawn four sides Thermal four sides Split four sides Rock face four sides EDGE DETAILS Square (standard) Buzzed Rounded edge Chamfer We're ready to fill your order and ship direct to your job site with minimal lead times. Contact Jon Ertl in our Landscaping & Cut Stone Products Department today! CALL JON: 800-832-2052 or Email jon@williamsstone.com

GRANITE CURBING < Back CORNERS AND BULLNOSES ROUNDED 90° AND 180° DRIVEWAY CORNERS AND BULLNOSES Williams Stone Company's 90° driveway corners and 180° bullnoses can be ordered with the same surface finishes and edge details as the curbing with which they will be installed. Corner Sizes Williams Stone Company offers 90° driveway corners (quarter circle) in three different radii for use with square-back curbing having 5-, 6- and 7-inch exposure. Driveway corners are 16 to 18-inches deep. Type A: 2-foot radius Type B : 3-foot radius Type C: 2.5-foot radius. Bullnose End Sizes Williams Stone Company offers bullnoses in two standard heights and three standard radii. Standard angle is 180º (half circle). Custom angles are available upon request (see 90º angle below). 16 to 18-inch height with 1-foot radius 16 to 18-inch height with 1.5-foot radius 16 to 18-inch height with 2-foot radius Edge Detail Options Straight edge (standard). Buzzed : 1/4-inch camfer (or eased) edge. Rounded edge : one or both edges are chamfered and then rounded off to 1/2-inch or greater radius. Chamfer : 45-degree bevel is standard, 1/2", 3/4: or 1". Beveled mountable : 45-dgree chamfer is standard, up to 3" x 3" or 4" x 4", or 5" x 5". Joint Options: N/A We're ready to fill your order and ship direct to your job site with minimal lead times. Contact Pat Wilson in our Curbing Products Department today! CALL PAT: 800-832-2052 or Email pat@williamsstone.com

GRANITE CURBING < Back TRANSITION CURB STRAIGHT OR CURVED TRANSITION CURBS TO MEET YOUR REQUIREMENTS Williams Stone Company offers a variety of straight and curved transition curbs to meet your driveway transition and/or ADA requirements, including handicap accessible transition ramps, standard driveway transitions, and vertical-to-slope transitions. Transition Sizing Custom transitions can be sawn from mountable to flush. They can be made from 2-foot up to 6.5-foot lengths. Handicap & Driveway Transition Ramps Handicap & driveway ramp transitions, from reveal to flush, are typically created using a straight or curved vertical curb with an angle joint at both ends. Sawn transitions must be custom ordered. Vertical-to-Slope Transitions Vertical-to-Slope transitions are used to transition from vertical granite curb or inlets to sloped granite edging. Standard vertical-to-slope transition curbs pitch the face to a 45-degree angle at one end from perfectly vertical at the other end. Edge Detail Options Straight edge (standard). Buzzed : 1/4-inch camfer (or eased) edge. Rounded edge : one or both edges are chamfered and then rounded off to 1/2-inch or greater radius. Chamfer : 45-degree bevel is standard, 1/2", 3/4: or 1". Beveled mountable : 45-dgree chamfer is standard, up to 3" x 3" or 4" x 4", or 5" x 5". Joints Standard joint or driveway and ADA ramp transition is a specified angle at both ends. Standard joint on vertical-to-slope transition is straight. We're ready to fill your order and ship direct to your job site with minimal lead times. Contact Pat Wilson in our Curbing Products Department today! CALL PAT: 800-832-2052 or Email pat@williamsstone.com

CUT STONE & LANDSCAPE PRODUCTS < Back STEPS & LANDINGS GRANITE STEPS & LANDINGS FOR LANDSCAPE DESIGN Williams Stone Company can produce granite slabs in a variety of configurations, finishes and edge details for use as steps and landings, depending on the need of the application or design. AVAILABLE SIZES Standard sizes 4- to 8-inches thick, 14- to 18-inches wide, 4- to 8-foot lengths. Custom steps 4 inches and thicker, up to 10-feet long by 5-feet wide. Wider and longer steps are available for use as landings. FINISH OPTIONS Sawn & thermaled top (standard) Split face (standard) Split top Sawn face Thermaled face Rock face Sawn back Sawn sides EDGE DETAIL OPTIONS Standard Buzzed Rounded edge Chamfer We're ready to fill your order and ship direct to your job site with minimal lead times. Contact Jon Ertl in our Landscaping & Cut Stone Products Department today! CALL JON: 800-832-2052 or Email jon@williamsstone.com

CUT STONE & LANDSCAPE PRODUCTS < Back BENCHES STANDARD & CUSTOM DESIGNED GRANITE BENCHES While Williams Stone Company sells standard pedestal benches, the vast majority of our benches are custom designed. The only limitation is your imagination! STANDARD AND CUSTOM SIZING AVAILABLE FINISH OPTIONS Sawn Split Thermaled Rock face EDGE DETAIL OPTIONS Standard Buzzed Rounded edge Chamfer We're ready to fill your order and ship direct to your job site with minimal lead times. Contact Jon Ertl in our Landscaping & Cut Stone Products Department today! CALL JON: 800-832-2052 or Email jon@williamsstone.com

GRANITE CURBING < Back ECONOMICAL 4-INCH CURBING ALL-NATURAL, COST-EFFECTIVE ALTERNATIVE TO CONCRETE CURBING Our advanced quarrying and manufacturing techniques enable us to provide this superior product at a very competitive price. Add the life-cycle-cost advantages of granite over concrete, and our 4-inch vertical curbing becomes the logical and justifiable choice. Economical Curb Sizing 4-Inch wide vertical granite curbing in 16- and 18-inch nominal heights is not only a natural, ecologically sound product, but also a surprisingly economical alternative to concrete curbing -- it even withstands heavy snow plowing. Edge Detail Options: N/A Joint Options: N/A We're ready to fill out the rest of your order with radiuses made to order and shipped direct to your job site with minimal lead times. Contact Pat Wilson in our Curbing Products Department today! CALL PAT: 800-832-2052 or Email pat@williamsstone.com

CUT STONE & LANDSCAPE PRODUCTS < Back WALL CAPS & PILLAR CAPS CUSTOM DESIGNED WALL CAPS AND PILLAR CAPS TO SUIT YOUR NEEDS Williams Stone Company can produce a wide variety of custom wall and pillar caps available in sizes, finishes and edge details to fit the requirements of the architect or landscape designer. Browse our site for examples of numerous types and sizes. CUSTOM SIZING AVAILABLE AVAILABLE FINISHES Sawn Split Thermal Rock face EDGE DETAILS Square (standard) Buzzed Rounded edge Chamfer We're ready to fill your order and ship direct to your job site with minimal lead times. Contact Jon Ertl in our Landscaping & Cut Stone Products Department today! CALL JON: 800-832-2052 or Email jon@williamsstone.com

< Back 7X20 TRANSITION CURB CUT Previous Next

PROJECT PORTFOLIO < Back CLARK ART INSTITUTE Williamstown, MA Project : Clark Art Institute Three-Tiered Reflecting Pool, Parking Area Curbing and Parking Area Water Bridges Granite : Williams Blue Sky GrayTM Location : Williamstown, MA Architect : Tadao Ando Architect & Associates Landscape Architect : Reed Hilderbrand Installing contractor : WM. J. Keller & Sons Construction Corp.

PROJECT PORTFOLIO < Back SOLDIERS & SAILORS CIVIL WAR MEMORIAL Bourne, MA Project : Steps, Sawn Pavers, Vertical Curbing, Dimensional Stone Granite : Williams Blue Sky Gray ™ Location : Bourne, Massachusetts